01：After receiving the machine, check whether the machine accessories are in good condition, and then install the machine according to the installation video.Install the hair removal and skin rejuvenation handle, and the handle connection part should be connected tightly to prevent falling off and water leakage.The handle is installed according to the marking, red for hair removal and blue for skin rejuvenation.
02：After the installation is complete, fill the water tank with water (It is recommended to use distilled water to prolong the life of the machine), then start the machine and run for 3-5 minutes, turn off the machine, and fill up the water twice to ensure that the water tank is full of water and the water circulation is normal.
03：In the process of use, pay attention to pick up or put down the handle gently, and it is forbidden to drop it.
04：If you encounter a water flow alarm, please check whether the water tank is full of water, and observe whether the water shows signs of flowing when the machine is working.
05：Keep the handle clean and hygienic when not in use, with no liquid or gel left on the filter.
06：If there is no light output when using the handle button controls, don’t be panic, try using the pedals.
